Li-valve tsa bolo tse nang le enjene: Molao-motheo oa ho sebetsa, mofuta le melemo

Li-valve tsa bolo tse nang le enjene li sebetsa joang

Li-valve tsa bolo tse nang le enjenesebetsa ka ho sebedisa actuator ya motlakase ho amohela matshwao a taolo (mohlala, 4-20mA) le ho kganna enjene. Enjene ena e potoloha ka mekgwa ya phetiso jwalo ka di-gear kapa di-worm drive, e phethola bolo ya valve ka di-degree tse 90. Potoloho ena e fetola tsela ya phallo ho bula, ho kwala, kapa ho laola phallo ya media ka nepo.

Valve ea Ball e nang le Motlakase ke eng?

AnValve ea bolo e nang le enjenee kopanya actuator ea motlakase le valve ea bolo. Actuator e laola potoloho ea enjene, ha valve e na le:

- 'Mele oa Valve: Matlo a nang le kanale ea phallo.

- Bolo: E potoloha ka 90° ho laola phallo.

- Setulo: E netefatsa ho kwala ha ho dutla.

- Kutu: E hokahanya actuator le bolo.

Sesebediswa sa ho Sebetsa ka Motlakase ke eng

Tlhaloso le Mokhoa oa ho Sebetsa

Li-actuator tsa motlakase li fetola matšoao a motlakase hore e be motsamao oa mechine (ho falla ha angular/linear) ho iketsetsa taolo ea li-valve. Likarolo tsa bohlokoa li kenyelletsa:

- Motlakase: E fetola motlakase hore e be torque.

- Lebokose la li-gear: E fokotsa lebelo, e eketsa torque.

- Sistimi ea Taolo: E laola mesebetsi ea li-engine.

- Li-sensor tsa Maikutlo: Netefatsa sebaka se nepahetseng.

Mefuta ea Li-Actuator tsa Motlakase

1. Li-Actuator tse otlolohileng: Hlahisa motsamao o otlolohileng bakeng sa di-valve tsa heke.

2. Li-actuator tsa ho Fetola Kotara: Fana ka potoloho ea 90° bakeng sa li-valve tsa bolo/serurubele.

Valve ea Bolo ke eng

Valve ea bolo e sebelisa bolo e potolohang e nang le mokoti ho laola phallo. Ts'ebetso ea eona ea 90° e netefatsa ho koaloa kapele, ho theoha ho fokolang ha khatello le ho tšoarella haholo.

Tlhophiso ea Li-valve tsa Libolo tsa Motlakase

Ka Sebopeho

Ka Mofuta oa Setiiso

- Tiiso e Bonolo: Litulo tsa polymer (PTFE, rabara) bakeng sa ho se dutle letho.

- Tiiso ea Tšepe: Metswako e thatafaditsweng bakeng sa mocheso/kgatello e phahameng.

Ka Moralo oa Libolo

- Bolo e Phaphametseng: Ho ikamahanya le maemo tlas'a khatello.

- Bolo e tsitsitseng: E kentswe ka trunnion bakeng sa botsitso.

- Bolo ea V-Port: Taolo e nepahetseng ea phallo.

- Bolo ea Litsela tse Tharo: E faposa kapa e kopanya phallo.

Melemo e 6 ea Bohlokoa ea Li-valve tsa Ball tsa Motlakase

1. Boiketsetso bo Felletseng

– Kopanya le litsamaiso tsa PLC/SCADA bakeng sa taolo e hole.

2. Karabelo e Potlakileng

– Finyella potoloho ea 90° ka metsotsoana bakeng sa ho tima ha tšohanyetso.

3. Litiiso tsa ho Lula ho sa Tsoa Lero

– Feta maemo a ANSI/FCI 70-2 Sehlopha sa VI.

4. Tlhokomelo e Tlase

– Litulo tse itlotsang li fokotsa ho tsofala.

5. Ho lumellana ho pharaletseng

– Sebetsana le mouoane, lik'hemik'hale, likhase (-40°C ho isa ho 450°C).

6. Bophelo bo Bolelele ba Tšebeletso

– Lipotoloho tse fetang 100,000 tse nang le thepa e hanelang mafome.

Hobaneng U Khetha Li-valve tsa Ball tsa Motlakase tsa NSW

Jwalo ka moetapele wa lefatshe ka bophara tlhahisong ya di-valve tsa diindasteri,Valve ea NSWe fana ka:

✅ Tlhahiso e Tiisitsoeng ke ISO 9001

– Mochini oa CNC o iketsang ka botlalo o netefatsa mamello ea ± 0.01mm.

✅ Litharollo tsa Smart Valve

– Li-actuator tse loketseng Modbus, Profibus, le IoT.

✅ Bokgoni ba Lilemo tse 20+

– Mehaho e fetang 10,000 ho pholletsa le oli/khase, HVAC, le kalafo ea metsi.

✅ Tšehetso ea Tekheniki ea 24/7

– Marangrang a likarolo tse ling tsa lefats'e ka bophara a nang le karabelo ea tšohanyetso ea lihora tse 48.

Litšebeliso tsa Li-valve tsa Motlakase tsa Ball

- Boiketsetso ba Liindasteri: Taolo ea ts'ebetso libakeng tsa ho hloekisa.

- Tsamaiso ea Metsi: Liteishene tsa ho pompa, lifeme tsa ho sefa.

- HVACTaolo ea libaka mehahong ea khoebo.

- Lijo/Seno se NooangMekhoa ea bohloeki ea CIP/SIP.