Valve ea Heke ea Slide e Sebetsa Joang: Tataiso e Felletseng ea Feme

Valve ea Heke ea Slide ke eng?

A valafo ea heke ea li-slide(e atisang ho bitsoavalve ea heke ea thipakapa e otlolohilengvalve ea heke) e laola phallo ho sebelisoa poleiti e thellang kapa "lehare" le tsamaeang ka ho otloloha ho phaephe. ​​Litšobotsi tsa bohlokoa:

- Ts'ebetso:Lehare le theohela hophallo ea boloko(ho tiisa litulo) kapa ho phahamisa ho lumellatsela e tletseng mokoallo.

- Moralo:E loketse bakeng sa slurry, phofo, le mecha ea phatlalatso e hlabang moo li-valve tsa setso li hlōlehang.

- Ho tiisa:E fihlella ho koala ha e kentsoe lipululana ka ho kuta lintho tse tiileng ka bohale ba lehare la eona.

—

Mefuta ea Li-valve tsa Heke ea Slide

1. Li-valve tse tloaelehileng tsa heke ea thipa

- Mahare a tšepe bakeng sa marotholi a khorofo (merafo, metsi a litšila).

- Litulo tse tšoarellang (EPDM/NBR) bakeng sa ho tiisa ka thata.

2. Li-valve tsa Heke ea Thipa ea Polyurethane (Valve ea Heke ea Thipa ea PU)

- Lisebelisoa tsa lehare:Lehare le koahetsoeng ka polyurethane bakeng sa ho hanyetsa ho kgohlopa ho feteletseng.

- Nyeoe ea Tšebeliso:E loketse bakeng sa marotholi a senyang haholo le merafo e merafong.

- Molemo:Nako ea bophelo e telele ka makhetlo a mararo ha e bapisoa le mahare a tšepe mecheng ea ho khohlela.

3. Li-valve tsa Heke ea Motlakase o Fetisang

- Heke e huloa ka botlalo bakeng sa phihlello ea ho hula.

- Thibelo ea phallo ha e le sieo sebakeng se bulehileng.

—

Kamoo Li-valve tsa Heke ea Li-slide li Sebetsang Kateng: Mohato ka Mohato

1. Boemo bo Bulehileng:

– Heke e nyolohela ka ho otloloha ka hara bonete.

– E hlahisa tsela e sa thibeloang ea phallo (bophara ba phaephe ea 100%).

2. Naha e Kwaletsweng:

– Lehare le thella fatshe, le hatella ditulo.

– E seha lintho tse tiileng bakeng sa ho tiisa hore li se ke tsa dutla.

3. Dikgetho tsa Tshebetso:

–Ka letsoho: Lebili la letsoho kapa lever.

–E iketsahalletseng: Li-actuator tsa pneumatic/motlakase.

—

Melemo ea Bohlokoa ea Li-valve tsa Heke ea Slide

1. Thibelo ea ho se Phalle: Moralo o tletseng o fokotsa ho theoha ha khatello.

2. Ho Hanela ho Abrasion: E sebetsa hantle haholo ka mashala, lintho tse tiileng le lintho tse senyang (haholo-holoLi-valve tsa heke tsa thipa tsa PU).

3. Ho Tiisoa ka Litsela Tse Pedi: Ho sebetsa hantle bakeng sa phallo ka mahlakoreng ka bobeli.

4. Tlhokomelo e Tlase: Moralo o bonolo o se nang mekgwa e rarahaneng.

5. E nyane le e bobebe: E bobebe ka 50% ho feta ea setsoli-valve tsa heke.

—

Likopo tsa Liindasteri

- Merafo: Taolo ea mohatla, marotholi a tšepe (tšebeliso ea mantlha bakeng saLi-valve tsa Heke ea Thipa ea Polyurethane).

- Metsi a litšila: Ho sebetsana le seretse, ho tlosa lehlohlojane.

- Limela tsa Motlakase: Mekhoa ea ho tsamaisa molora e fofang.

- Ts'ebetso ea Lik'hemik'hale: Metsi a nang le viscous, phetiso ea polymer.

- Makhasi le Pampiri: Taolo ea lerōle le nang le faeba e ngata.

—

Ho Khetha Moetsi/Mofani ea Tšepahalang Chaena

Chaenae laola tlhahiso ea li-valve tsa indasteri. Mekhoa ea bohlokoa ea khetho:

1. Tsebo ea Lintho tse bonahalang:

– NetefatsaPU thipa heke valveBafepedi ba sebedisa polyurethane e netefaditsweng ke ISO.

– Netefatsa maemo a tšepe (SS316, tšepe ea khabone).

2. Lisetifikeiti:ISO 9001, API 600, ATEX.

3. Ho iketsetsa:Kopa meralo e ikgethileng (thepa ea liner, boholo ba kou).

4. Teko:Batla litlaleho tsa tlhahlobo ea hydrostatic/abrasion.

5. Thepa ea thepa:Netefatsa thomello ea lefats'e ka bophara le ho tenyetseha ha MOQ.

> Keletso ea Setsebi:HolimoBahlahisi ba Chaenafana ka mehlala ea CAD, litifikeiti tsa DNV-GL, le tšehetso ea tekheniki ea 24/7.

—

Hobaneng o lokela ho kgetha di-valve tsa thipa tsa polyurethane (PU)

- Ho Hanela ho Abrasion: Nako e telele ea ho tsofala ka makhetlo a 10 ha e bapisoa le tšepe lits'ebetsong tsa slurry.

- Tšireletso ea 'mele khahlanong le mafome: E mamella asiti/alkaline media.

- Bokgoni ba Ditjeo: Ditjeo tse fokotsehileng tsa nako ya ho se sebetse le tsa ho nkela sebaka.

- Tshebetso ya ho kwala: E boloka botsitso ka dintho tse nyenyane.

—

Qetello

Kutloisisovalve ea heke ea li-slide e sebetsa joang—haholo-holo mefuta e khethehileng joalo kaLi-valve tsa Heke ea Thipa ea Polyurethane—e netefatsa tshebetso e ntle ka ho fetisisa dibakeng tse thata tsa diindasteri. Bakeng sa ditshebediso tsa lerōle le kgohlang,Li-valve tsa heke tsa thipa tsa PUfana ka ho tšoarella ho sa bapisoeng le letho. Sebelisana le setifikeitiChaenabahlahisi/bafepedibakeng sa ditharollo tse theko e tlase le tsa boleng bo hodimo tse etseditsweng ho latela ditlhoko tsa merafo, metsi a ditshila le tsa ho sebetsana le dikhemikhale.